Test 1(Driver Level Accuracy)

*** TEST 1-0 *** (Driver Level with pmu check)(pc =256)

Pass

*** TEST 1-1 *** (Driver current /pmu check)

Pass

Test 2(Cmp ck/Pogo Contact)

*** TEST 2-0 *** (Compare level overdrive check)

Pass

*** TEST 2-1 *** (Compare level accuracy check)

Pass

*** Test 2-2(Contact Test)

Pass

*** TEST 2-3 *** (FTC error Ck)

Pass

Test 3(Timing Formats)

*** TEST 3-0 *** (Timing format check)

Pass

Test 4(Active Load Acc./Formats)

*** TEST 4-0 *** (Driver Leakage current /pmu check)

Pass

*** TEST 4-1 *** (Active Load currents with pmu check)

Pass

*** TEST 4-2 *** (Load Format and Clamp rail check)

Pass

*** TEST 4-3 *** (Short to Ground(I/O & Pmu) relay check)

Pass

*** TEST 4-4 *** (Pmu force current/measure voltage check)

Pass

*** TEST 4-5 *** (Pmu 100ma check)

Pass

Test 5(Time set Switch/Looping)

*** Test 5-0(Loop Counter check)

Pass

*** Test 5-1(Loop Start/End of test Bit check

Pass

*** Test 5-2(FICM loop check)

Pass

*** Test 5-3(Cycle Length ts sw on/off quantum counter check)

Pass

*** Test 5-4(Cycle Length ts off quantum functional check)

Pass

*** Test 5-5(cycle length stretch)

Pass

*** Test 5-6(Test head timset switch-Parta)

Pass

*** Test 5-7(Test head timset switch-Partb)

Pass

*** Test 5-8(cycle address check)

Pass

Test 6(Functional Pattern/Trigger)

*** TEST 6-0(50Mhz pattern test(4194304))

Pass

*** TEST 6-1(Trigger counter check)

Pass

*** TEST 6-2(Heater check)

Pass

*** TEST 6-3(Dma Transfer check)(4194304)

Page 1

Credence_VistaMS28_verify.txt.log

Pass

*** TEST 6-4(Srt Memory Add. ck)

Pass

Test 7(1151 power supply)

*** TEST 7-0 *** (1151 voltage check)

Checking TEK/1171:V1.01 Maximum voltage = 7.500 Maximum current = 4.000

Checking TEK/1171:V1.01 Maximum voltage = 7.500 Maximum current = 4.000

Checking TEK/1171:V1.01 Maximum voltage = 7.500 Maximum current = 4.000

Checking TEK/1171:V1.01 Maximum voltage = 7.500 Maximum current = 4.000

Checking TEK/1172:V1.01 Maximum voltage = 15.000 Maximum current = 2.000

Checking TEK/1172:V1.01 Maximum voltage = 15.000 Maximum current = 2.000

Checking TEK/1171:V1.01 Maximum voltage = 7.500 Maximum current = 4.000

Pass

Test 8(Extended Features)

*** TEST 8-0(S-f memory check)(4194304)

Pass

*** Test 8-1(Extend Loop Counter check)

Pass

*** Test 8-2(Start On Pass A check)

Pass

*** Test 8-3(Start On Pass B check)

Pass

*** Test 8-4(Start Vectors Anywhere)

Pass

*** Test 8-5(Repeat Vector)

Pass

*** Test 8-6(Rpt cnt reg/loops)

Pass

*** Test 8-7(Flag / Advance)

Pass

*** Test 8-8(Fast Stop)

Pass

Page 2